Brugmann AD 3-chamber
Window profile system Brugmann AD 3-chamber
Brand Brugmann
| Outer width of the frame | 73 mm | |
| Uf profile | 1.45 W/Km² | |
| Glass unit thickness | 40 mm |
| Outer width of the frame | 73 mm |
| U Factor of profile system (armoured if applied) | 1.45 W/Km² |
| Thickness of outer wall | 3 mm |
| Number of chambers in the frame | 3 |
| Number of chambers in the sash | 3 |
| Max width of a glass unit | 40 mm |
| No. of sealing circuits | 2 |
| Material | vinyl profiles |
| Type of system design (AD, MD) | AD |
| Turn constructions' fittings | yes |
| Tilt and turn constructions' fittings | yes |
| Turn balcony doors fittings | yes |
| Tilt and turn balcony doors fittings | yes |
| Fixed window light blocking | 68 mm |
| Sash window light blocking | 118 mm |
Profile system "Br & # 252; gmann AD" in its thermal and structural features meet all the requirements of the time.
Deep planting glass significantly reduces the "cold bridges" through a glass spacer.
One of the decisive criteria for the selection of PVC profiles for both processors and for end users is a reasonable price-performance ratio. Profile "Brugmann" offers the best quality at a reasonable price.
Apart from high quality plastic and precise geometry profile "Br & # 252; gmann" has a number of technological advantages:
- The thickness of the outer walls of the basic profiles of at least 3 mm, which provides a high strength weld
- The presence in the catchment-reservoir chamber 4 mm gate, water seeping through the gate under the bead, even when the tilt position of the sash
- Metal amplifiers are not in contact with the walls of the chamber through special projections on the walls of the amplification chamber, which reduces heat loss along the walls of the profile and increase the thermal resistance of the profile
- Semicircular groove collector rebate in the frame / sash facilitates positioning of the milling cutter with the drainage grooves - less risk of damaging the camera reinforcement profile
- The presence of additional horizontal internal partitions in place hinge avoids deflection of the outer walls of the profile and increase the rate of tear strength hinge
- Offset axis mounting hardware in the casement is 13 mm from the edge of the frame, which allows the use of stronger locking strap and provides additional protection against burglary
- Glazing up to 40 mm at the mounting width of 73 mm is optimal, allowing the cold time of year to avoid the risk of condensation on the inner surface of the profile
- Same for the reinforcement of the frame and sash, the use of a closed reinforcement in structures with high demands on statics
- The number of loops, material and color of the seal: 2 continuous loop seal of weather resistant EPDM-rubber
Deep planting glass significantly reduces the "cold bridges" through a glass spacer.
One of the decisive criteria for the selection of PVC profiles for both processors and for end users is a reasonable price-performance ratio. Profile "Brugmann" offers the best quality at a reasonable price.
Apart from high quality plastic and precise geometry profile "Br & # 252; gmann" has a number of technological advantages:
- The thickness of the outer walls of the basic profiles of at least 3 mm, which provides a high strength weld
- The presence in the catchment-reservoir chamber 4 mm gate, water seeping through the gate under the bead, even when the tilt position of the sash
- Metal amplifiers are not in contact with the walls of the chamber through special projections on the walls of the amplification chamber, which reduces heat loss along the walls of the profile and increase the thermal resistance of the profile
- Semicircular groove collector rebate in the frame / sash facilitates positioning of the milling cutter with the drainage grooves - less risk of damaging the camera reinforcement profile
- The presence of additional horizontal internal partitions in place hinge avoids deflection of the outer walls of the profile and increase the rate of tear strength hinge
- Offset axis mounting hardware in the casement is 13 mm from the edge of the frame, which allows the use of stronger locking strap and provides additional protection against burglary
- Glazing up to 40 mm at the mounting width of 73 mm is optimal, allowing the cold time of year to avoid the risk of condensation on the inner surface of the profile
- Same for the reinforcement of the frame and sash, the use of a closed reinforcement in structures with high demands on statics
- The number of loops, material and color of the seal: 2 continuous loop seal of weather resistant EPDM-rubber
