Profile systems with mounting width less 59 mm

Profile material - aluminium, Outer width of the frame - 38 mm

Thermal systems for rozsuvnih konstruktsіy s napravlyayuchimi s nerzhavіyuchoї stalі that Hi-Fin schіtochnogo uschіlnyuvacha. The base width of 38 mm stulki Osnovnі characteristics: - Glibin stulki 38 mm - The support by teploperedachі vіdnositsya to the Group 2.3 (zgіdno DIN52619-3, UR = …

Technical characteristics S 300 Deluxe Alutherm

Profile material - aluminium, Outer width of the frame - 45 mm

Thermal systems for rozsuvnih konstruktsіy s napravlyayuchimi s nerzhavіyuchoї stalі that Hi-Fin schіtochnogo uschіlnyuvacha. The base width of 45 mm stulki Osnovnі characteristics: - Glibin stulki 45 mm - The support by teploperedachі vіdnositsya to the Group 2.3 (zgіdno DIN52619-3, UR = …

Technical characteristics S 400 Premier Alutherm

Profile material - aluminium, Outer width of the frame - 38 mm, number of chambers in the frame / sash - 1/1

Aluminium cold system Pony-375 is intended for the production of windows, doors, windows, entrance doors and so on. A wide range of profiles allows you to create designs of various configurations with straight and rounded forms. Eurogroove allows for fittings and accessories from different …

Technical characteristics Pony-375

Profile material - aluminium, Outer width of the frame - 37 mm

The smallest and elegant system for "tilt and turn" constructions Main characteristics: • Basic depth of 37 mm • Contains a special sealing system ("ALUSEAL"), which is provided with three circuits of EPDM seals. • The system is suitable for the creation of all types of "tilt and turn" …

Technical characteristics M940 Mini

Profile material - aluminium, Outer width of the frame - 38 mm, number of chambers in the frame / sash - 1/1

Алюминиевая система с рамами высотой 47 мм и 57 мм; небольшими, средними и большими створками; дверными створками с открыванием наружу и внутрь. Толщина заполнения от 6 мм до 24 мм.

Technical characteristics Opening system 038

Profile material - aluminium, Outer width of the frame - 40 mm, number of chambers in the frame / sash - 1/1

Aluminium system profiles without the thermal insulation, mainly dedicated to the interior of buildings: boxes, partition walls, display cases, sliding doors (manually or automatically operated), double and single acting doors. The structural depth equals 40 mm. The PE 40 system allows to use the …

Technical characteristics Ponzio PE 40

Profile material - aluminium, Outer width of the frame - 59 mm, number of chambers in the frame / sash - 1/1

M9400 consists one of the most completed opening systems which can serve a wide range of different needs with satisfied performances. Basic depth of system 45 mm Great diversity of designs regarding the windows and doors’ appearance Big variety of profiles which can be used according to the …

Technical characteristics M 9400 Softline Plus

Profile material - aluminium, Outer width of the frame - 46 mm, number of chambers in the frame / sash - 1/1

The aluminum profile system without thermal break F46 is designed for standard windows in an unheated room or interior partitions. Can create large structures and all forms, including round, beveled, triangular. Two loop seal. Eurogroove. The thickness of the glass: 6 mm glass, double glazing …

Technical characteristics Framex F46

Profile material - aluminium, Outer width of the frame - 46 mm, number of chambers in the frame / sash - 1/1

The aluminum profile system without thermal break F46 is designed for standard doors in an unheated room or interior partitions. Can create large structures. One loop seal. Eurogroove. The thickness of the glass: 6 mm glass, double glazing up to 24 mm.

Technical characteristics Framex F46 Door

Profile material - aluminium, Outer width of the frame - 40 mm, number of chambers in the frame / sash - 1/1

Aluminium systems Etem E1000 is intended for the production of single and double windows and balconies, doors and windows. Economically cost-effective solution, especially for the main entrance. The possibility of staining profile in any color RAL, decoration wood and anodizing allows to …

Technical characteristics E1000

Profile material - aluminium, Outer width of the frame - 50 mm

System for tilt and turn windows and doors, base depth of 50 mm. Main characteristics: • Basic depth of 50 mm. • The profiles are suitable for all types of structures: turning, tilting, rotating windows, as well as shop windows. • Specially designed profiles for entrance groups. • Wide …

Technical characteristics M15000 Prestige

Profile material - aluminium, Outer width of the frame - 46 mm, number of chambers in the frame / sash - 1/1

A feature of the series BF 10 - simplicity and reliability. It allows you to make windows, doors, stained-glass partitions that do not require thermal insulation.

Technical characteristics DP 10

Profile material - aluminium, Outer width of the frame - 52 mm, number of chambers in the frame / sash - 1/1

Aluminium system profiles without the thermal insulation, mainly dedicated to the interior of buildings: boxes, partition walls, display cases, sliding doors (manually or automatically operated), double acting and smoke hermetic doors. The PT 50 system allows to use the variety of fillings: glass, …

Technical characteristics Ponzio PT 50

Profile material - aluminium, Outer width of the frame - 48 mm, number of chambers in the frame / sash - 1/1

The system of aluminum profiles designed for architectural ALTC48 internal and external development, which does not require thermal insulation. Profile systems and components sispolzovaniem various accessories can manufacture the following types of products. Window and door system without …

Technical characteristics ALTC48

Profile material - aluminium, Outer width of the frame - 40 mm, number of chambers in the frame / sash - 1/1

ALT100 - system of aluminum profiles for the manufacture of balcony glazing frames, which protect balconies and loggias from rain and wind, noise and dust, improve heat insulation, creating additional comfort. The system includes profiles for manufacturing constructions sliding, folding and fixed …

Technical characteristics ALT100