ALMplast 60
Window profile system ALMplast 60
Brand ALMplast
| Outer width of the frame | 60 mm | |
| Uf profile | 1.6 W/Km² | |
| Glass unit thickness | 32 mm |
| Outer width of the frame | 60 mm |
| U Factor of profile system (armoured if applied) | 1.6 W/Km² |
| Thickness of outer wall | 2.7 mm |
| Number of chambers in the frame | 3 |
| Number of chambers in the sash | 3 |
| Max width of a glass unit | 32 mm |
| No. of sealing circuits | 2 |
| Material | vinyl profiles |
| Type of system design (AD, MD) | AD |
| Turn constructions' fittings | yes |
| Tilt and turn constructions' fittings | yes |
| Turn balcony doors fittings | yes |
| Tilt and turn balcony doors fittings | yes |
| Fixed window light blocking | 68 mm |
| Sash window light blocking | 120 mm |
| Transom window light blocking | 80 mm |
| Sound insulation | 46 dB |
| The Ukrainian certificate | yes |
Pfalz.
The leaf is big and deep catchment chamber with an oblique seam to remove moisture and 4mm lock.
Overlap seam.
Height - 20 mm
Width - 14 mm
The outer contour of the profile.
All exterior surfaces are tapered at an angle of 15 degrees, the inner surface at a right angle. Fillet angle of 15 degrees.
The wall thickness of the profile.
The outer walls have a thickness of 2.7 mm in accordance with RAL GZ 716/1, part 1 and 7. The inner walls konstrutivnym according to requirements.
Sealers.
Two contour seal thrust pretend stacked around the perimeter of the window without incisions. Solid glass contour seal. Made of weather resistant EPDM-rubber. Coextruded sealing of fillet PCE-based elastomer.
Reinforcement.
Profiles of galvanized steel in accordance with the RAL GZ 716/1, part 1 and 7.
Glazing.
All standard types of glass units, including the improved heat and zvukozaschitoy and burglar - thickness up to 32 mm when the mounting width of 60 mm.
Draining / venting.
In a separate mixing chamber forward or hidden down.
Accessories.
All standard fittings for 16 mm at eurogroove indent axis fitting groove 13 mm from the edge of the frame.
The leaf is big and deep catchment chamber with an oblique seam to remove moisture and 4mm lock.
Overlap seam.
Height - 20 mm
Width - 14 mm
The outer contour of the profile.
All exterior surfaces are tapered at an angle of 15 degrees, the inner surface at a right angle. Fillet angle of 15 degrees.
The wall thickness of the profile.
The outer walls have a thickness of 2.7 mm in accordance with RAL GZ 716/1, part 1 and 7. The inner walls konstrutivnym according to requirements.
Sealers.
Two contour seal thrust pretend stacked around the perimeter of the window without incisions. Solid glass contour seal. Made of weather resistant EPDM-rubber. Coextruded sealing of fillet PCE-based elastomer.
Reinforcement.
Profiles of galvanized steel in accordance with the RAL GZ 716/1, part 1 and 7.
Glazing.
All standard types of glass units, including the improved heat and zvukozaschitoy and burglar - thickness up to 32 mm when the mounting width of 60 mm.
Draining / venting.
In a separate mixing chamber forward or hidden down.
Accessories.
All standard fittings for 16 mm at eurogroove indent axis fitting groove 13 mm from the edge of the frame.
