REHAU Euro-Design 60
Window profile system Euro-Design 60
Brand REHAU
| Outer width of the frame | 60 mm | |
| Uf profile | 1.6 W/Km² | |
| Glass unit thickness | 33 mm |
| Outer width of the frame | 60 mm |
| U Factor of profile system (armoured if applied) | 1.6 W/Km² |
| Thickness of outer wall | 2,7 mm |
| Number of chambers in the frame | 3 |
| Number of chambers in the sash | 3 |
| Max width of a glass unit | 33 mm |
| No. of sealing circuits | 2 |
| Material | vinyl profiles |
| Type of system design (AD, MD) | AD |
| 1684321353 | yes |
| Max length for white profile | 4000 mm |
| Max length for colored profile, mm | 3000 mm |
| Turn constructions' fittings | yes |
| Tilt and turn constructions' fittings | yes |
| Pivot constructions' fittings | yes |
| Horizontal sliding constructions' fittings | yes |
| Partly horizontal sliding constructions' fittings | yes |
| Tilt and sliding horizontal constructions' fittings | yes |
| Turn balcony doors fittings | yes |
| Tilt and turn balcony doors fittings | yes |
| Fixed window light blocking | 64 mm |
| Sash window light blocking | 116 mm |
| Double-leaf sash window light blocking | 148 mm |
| Transom window light blocking | 68 mm |
| Transom bar + 2 sashes window light blocking | 172 mm |
| Muntins glued to the glass unit | yes |
| System of connection to roller shutters | yes |
| Surface: painted | yes |
| Surface: colorant in the material | yes |
| Surface: lamination | yes |
| Surface: wood imitation | yes |
| Impervious to rain and air to EN 12 208, 12 207 | класс 9А, класс 4 |
| Sound insulation | 41 dB |
| Burglary resistance EN V 1627, RC2 (WK2) | yes |
| The Ukrainian certificate | yes |
- Same seals porch in the frame and sash: simplification of internal logistics, reduction of inventory, rational production.
- Ability to set the same reinforcement in the box and impost. Reinforcement is identical to that used in other systems of profiles Rehau: decrease in inventories, no regrading.
- Chamber depth 35 mm reinforcement: the ability to install reinforcement with improved statistical characteristics.
- Interlocking chambers reinforcement flaps:
- Fixing T-profile reinforcement. Using the L-shaped profile of the reinforcement does not require drilling holes through the reinforcement when installing the locking devices on the wing;
- Intensification of production, reduction of downtime.
- Securing the bearing parts 2 wall fittings made of PVC, or additionally by reinforcement: reliable transfer of sash weights.
- Offset of fitting groove 13 mm: the ability to install reinforced locking devices.
- Same performance of seam profiles box, sash and mullion: identical contour milling cutter is not required to reinstall or buy extra equipment.
- The depth profiles of 60 mm, three-compartment design: in combination with the use of appropriate glazing in the manufacture of window unit, achieves high levels of thermal protection and noise protection.
- Modern design: slim lines and elegant appearance of the profile, elegant optics with slopes and rounded.
- Two contour seal around the perimeter with large areas adjoining on the box and sash: protection against drafts, dust, water and heat loss.
- Inclined with a smooth base seam of the box: the simplification of cleaning helps remove moisture from the rebate through the drainage system.
- Ability to set the same reinforcement in the box and impost. Reinforcement is identical to that used in other systems of profiles Rehau: decrease in inventories, no regrading.
- Chamber depth 35 mm reinforcement: the ability to install reinforcement with improved statistical characteristics.
- Interlocking chambers reinforcement flaps:
- Fixing T-profile reinforcement. Using the L-shaped profile of the reinforcement does not require drilling holes through the reinforcement when installing the locking devices on the wing;
- Intensification of production, reduction of downtime.
- Securing the bearing parts 2 wall fittings made of PVC, or additionally by reinforcement: reliable transfer of sash weights.
- Offset of fitting groove 13 mm: the ability to install reinforced locking devices.
- Same performance of seam profiles box, sash and mullion: identical contour milling cutter is not required to reinstall or buy extra equipment.
- The depth profiles of 60 mm, three-compartment design: in combination with the use of appropriate glazing in the manufacture of window unit, achieves high levels of thermal protection and noise protection.
- Modern design: slim lines and elegant appearance of the profile, elegant optics with slopes and rounded.
- Two contour seal around the perimeter with large areas adjoining on the box and sash: protection against drafts, dust, water and heat loss.
- Inclined with a smooth base seam of the box: the simplification of cleaning helps remove moisture from the rebate through the drainage system.
The profiles included in the profile system
Mullions REHAU Euro-Design 60
