Salamander Industrie - Produkte GmbH Design 2D
Window profile system Design 2D
| Outer width of the frame | 60 mm | |
| Uf profile | 1.65 W/Km² | |
| Glass unit thickness | 48 mm |
| Outer width of the frame | 60 mm |
| U Factor of profile system (armoured if applied) | 1.65 W/Km² |
| Thickness of outer wall | 3 mm |
| Number of chambers in the frame | 3 |
| Number of chambers in the sash | 3 |
| Max width of a glass unit | 48 mm |
| No. of sealing circuits | 2 |
| Material | vinyl profiles |
| Type of system design (AD, MD) | AD |
| Turn constructions' fittings | yes |
| Tilt and turn constructions' fittings | yes |
| Turn balcony doors fittings | yes |
| Tilt and turn balcony doors fittings | yes |
| Fixed window light blocking | 70 mm |
| Sash window light blocking | 122 mm |
| Sound insulation | 46 dB |
| Burglary resistance EN V 1627, RC1 (WK1) | yes |
| Burglary resistance EN V 1627, RC2 (WK2) | yes |
| The Ukrainian certificate | yes |
Standard system with seals for internal and external porch. The efficiency of the system meets the standards for all load groups A, B, C on the static rigidity and air-permeability with a head wind of up to 120 kg / m2.
Design advantages of Design 2D:
1. The installation width of 60 mm (frame and sash offset) and the installation width of 76 mm (frame and sash in one line)
2. The thickness of the outer walls of the basic profiles of at least 3 mm, which provides a high strength weld
3. due to the presence in the cell catchment inclined plane collector and 4mm shutter ensures rapid removal of rainwater and condensation from the rebate of the frame / sash, even with the shower, the water seeps through the dam is not a bead, even when the tilt position of the sash
4. Metal amplifiers do not touch the walls of the amplification chamber through a special projection on the walls of the amplifying chamber, which reduces heat loss on the amplifier and increases the thermal resistance profile
5. The semi-circular groove collector rebate in the frame / sash facilitates positioning of the milling cutter with the drainage grooves - less risk of damaging the camera reinforcement profile
6. enhancing the tides in the wall of the frame in place fitting attachment loops allow to reach its highest levels of the tear strength of attachment fittings
7. Indent axis mounting hardware in the casement is 13 mm from the edge of the frame, which allows the use of stronger locking strap
8. glazing thickness up to 48 mm with a width of 76mm mounting
9. Shock resistance at temperatures below freezing:
10 of 10 samples at -30 ° C without damage
11. Equal reinforcement for the frame and sash, the use of a closed reinforcement in structures with high demands on statics
Design advantages of Design 2D:
1. The installation width of 60 mm (frame and sash offset) and the installation width of 76 mm (frame and sash in one line)
2. The thickness of the outer walls of the basic profiles of at least 3 mm, which provides a high strength weld
3. due to the presence in the cell catchment inclined plane collector and 4mm shutter ensures rapid removal of rainwater and condensation from the rebate of the frame / sash, even with the shower, the water seeps through the dam is not a bead, even when the tilt position of the sash
4. Metal amplifiers do not touch the walls of the amplification chamber through a special projection on the walls of the amplifying chamber, which reduces heat loss on the amplifier and increases the thermal resistance profile
5. The semi-circular groove collector rebate in the frame / sash facilitates positioning of the milling cutter with the drainage grooves - less risk of damaging the camera reinforcement profile
6. enhancing the tides in the wall of the frame in place fitting attachment loops allow to reach its highest levels of the tear strength of attachment fittings
7. Indent axis mounting hardware in the casement is 13 mm from the edge of the frame, which allows the use of stronger locking strap
8. glazing thickness up to 48 mm with a width of 76mm mounting
9. Shock resistance at temperatures below freezing:
10 of 10 samples at -30 ° C without damage
11. Equal reinforcement for the frame and sash, the use of a closed reinforcement in structures with high demands on statics
The profiles included in the profile system
Mullions Salamander Industrie - Produkte GmbH Design 2D
