Aluminium profile systems with mounting width 60 — 69 mm

Profile material - aluminium, Outer width of the frame - 63 mm, number of chambers in the frame / sash - 3/3

Thermal systems for the "swing-vіdkidnih" vіkonnih that door konstruktsіy, sertifіkovana IFT Rosenheim. Osnovnі characteristics: • Basic Glibin Sistemi 62.5 mm • For Prop teploperedachі vіdnositsya to Group 2.1 • Mіstit spetsіalno rozroblenі profіlі door whether yakogo rozmіru scho іdealno …

Technical characteristics M 11000 Alutherm Plus

Profile material - aluminium, Outer width of the frame - 65 mm, number of chambers in the frame / sash - 3/3

Window series with a basic depth profile of 65 mm. Turn-and-tilt, swivel, tilt, leaved design valves. Exterior and interior views of the opening. Pan-tilt,-and-over, hidden and parallel-sliding design, folding wings. Balcony doors. Vzlomozaschitnye and bulletproof construction. Construction flaps …

Technical characteristics WICLINE 65

Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3

Типовой пример классической алюминиевой профильной системы с терморазрывом (термомостом) шириной 24 мм. Если в установленных алюминиевых окнах не известен производитель и серия оконного профиля, для расчета теплопотерь достаточно выбрать эту серию для рам и створок толщиной 60 мм. Определить этот …

Technical characteristics Алюминиевый профиль 60 мм, термомост 24 мм

Profile material - aluminium, Outer width of the frame - 62 mm, number of chambers in the frame / sash - 3/3

ALT W62 HS is window and door systems with hidden sash. Due to the minimum visible width of the profiles, as well as the same visible width of the fixed light and the active sash, the glazing area of the window with the hidden sash is much larger than the glazing area of classic window with the …

Technical characteristics ALT W62 HS

Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3

The S60 is a aluminium system with thermobridge (thermo inserts from the polyamide reinforced by fiber glass) 27 mm. The C60 system has the basic size of 60 mm. It use to manufacture windows, stained-glass windows and doors. In a basis of C60 system so-called "eurogroove" is put is allows to use …

Technical characteristics S60

Profile material - aluminium, Outer width of the frame - 69 mm, number of chambers in the frame / sash - 3/3

Warm FT69 aluminum system intended for the manufacture of doors with good heat and noise insulation at high operational stability and lightness. Eurogroove. Coefficient of thermal resistance: 0.62 m2K/W. The thickness of the glass: 22-46 mm.

Technical characteristics Framex FT69 Door

Profile material - aluminium, Outer width of the frame - 69 mm, number of chambers in the frame / sash - 3/3

Warm FT69 aluminum system intended for the manufacture of windows and doors with good heat and noise insulation at high operational stability and lightness. Three loop seal. Eurogroove. Coefficient of thermal resistance: 0.62 m2K/W. The thickness of the glass: 22-46 mm.

Technical characteristics FT69

Profile material - aluminium, Outer width of the frame - 62 mm, number of chambers in the frame / sash - 3/3

Thermo Modular System 62 (TM62 2.1) is a three-chamber system of aluminum profiles that are used to manufacture windows, doors, windows, partitions. The system TM 62 2.1 can use different types of fillings, including glazing thickness 13-57 mm. The maximum width of the turning and …

Technical characteristics TM62

Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3

Aluminum window and door system with a mounting width of 60 mm. Leaf width of 70 mm. Ideal for commercial and industrial buildings. Good thermal insulation is achieved through the insert of polyamide, reinforced with fiberglass. The cavity is filled with polyurethane foam with high insulation …

Technical characteristics RG60

Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3

Типовой пример классической алюминиевой профильной системы с терморазрывом (термомостом) шириной 16 мм. Если в установленных алюминиевых окнах не известен производитель и серия оконного профиля, для расчета теплопотерь достаточно выбрать эту серию для рам и створок толщиной 60 мм. Определить этот …

Technical characteristics Алюминиевый профиль 60 мм, термомост 16 мм

Profile material - aluminium, Outer width of the frame - 69 mm, number of chambers in the frame / sash - 1/1

Lightweight sliding system in parallel-sliding constructions. It pays great attention to the weight of the profile, as well as the quality and functionality of the design. PR26 The system can be combined with opening the system PR52 and provide an ideal solution for lightweight structures by …

Technical characteristics PR26

Profile material - aluminium, Outer width of the frame - 65 mm, number of chambers in the frame / sash - 1/3

Window "cold" series with a basic depth profile of 65 mm, without insulation. Turn-and-tilt, swivel and folding design valves. Heat protection: Uf-koeffitsienty according to DIN EN ISO 10077

Technical characteristics WICLINE 65N

Profile material - aluminium, Outer width of the frame - 60 mm

Warm aluminum profile with a mounting width of 60 mm. Out of production in 2002.

Technical characteristics Wicline 60

Profile material - aluminium, Outer width of the frame - 60 mm

Door aluminum profile with a mounting width of 60 mm Out of production in 2002.

Technical characteristics Wicstyle 60

Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 1/1

Cool aluminum profile with a mounting width of 60 mm. Out of production in 2002.

Technical characteristics Wicline 60n