VEKA Topline AD 4/4
Window profile system Topline AD 4/4
Brand VEKA
Outer width of the frame | 70 mm | |
Uf profile | 1.3 W/Km² | |
Glass unit thickness | 42 mm |
Outer width of the frame | 70 mm |
U Factor of profile system (armoured if applied) | 1.3 W/Km² |
Thickness of outer wall | 3 mm |
Number of chambers in the frame | 4 |
Number of chambers in the sash | 4 |
Max width of a glass unit | 42 mm |
No. of sealing circuits | 2 |
Material | vinyl profiles |
Type of system design (AD, MD) | AD |
Turn constructions' fittings | yes |
Tilt and turn constructions' fittings | yes |
Horizontal sliding constructions' fittings | yes |
Turn balcony doors fittings | yes |
Tilt and turn balcony doors fittings | yes |
Fixed window light blocking | 67 mm |
Sash window light blocking | 118 mm |
Double-leaf sash window light blocking | 64 mm |
Transom window light blocking | 64 mm |
Transom bar + 2 sashes window light blocking | 187 mm |
The Ukrainian certificate | yes |
The base system TOPLINE AD is a complex system: available, there are four frames of different mounting heights and mounting profile (Adapterprofil) to achieve the desired outer width when combined rotary-flaps for fixed glazing, as well as eight different variants of wings with eurogroove performed with combined and shifted surface. Along with the standard 80 mm sash are also smaller versions of 70 mm and larger 105 mm for emergency doors or oversized valves. Two of the eight casement profile designed for outward opening options. The dual ARTC - seals offers besides five deaf mullion with an outer width of 64, 75, 85, 100 and 118 mm. To mount the deaf impost firm VEKA has developed special installation equipment connectors impost, using which it is not necessary to cut out the frame sealant because it passes completely.
The rounded contours of TOPLINE AD is achieved by means of three false mullion and Face plate design allows you to set the visible width of the swing-flaps from 112 to 166 mm. Face plate for all caps are colored performance in detail, it was possible to select different colors for interior and exterior sides.
ARTC - sealing systems are also available, as well as seals, installed and sealed at the factory, in black and gray colors.
With five cameras in the doors and frames, as well as a mounting width of 70 mm already comply with the requirements of the future Regulation on energy saving and thermal insulation.
The rounded contours of TOPLINE AD is achieved by means of three false mullion and Face plate design allows you to set the visible width of the swing-flaps from 112 to 166 mm. Face plate for all caps are colored performance in detail, it was possible to select different colors for interior and exterior sides.
ARTC - sealing systems are also available, as well as seals, installed and sealed at the factory, in black and gray colors.
With five cameras in the doors and frames, as well as a mounting width of 70 mm already comply with the requirements of the future Regulation on energy saving and thermal insulation.