Profile systems

Profile material - aluminium, Outer width of the frame - 125 mm

"Window series with a double flap and a mounting depth of the profile 125/135 mm. Improved insulation and heat insulation. Turn-and-tilt, swivel, and tilt design valves. The outer flap heat-resistant and latent circuit. Burglary-protective design. Heat protection: Uf-koeffitsienty in accordance …

Technical characteristics WICLINE 125

Profile material - aluminium, Outer width of the frame - 77 mm, number of chambers in the frame / sash - 3/3

Window series with a basic depth profile of 77 mm. Turn-and-tilt, swivel, tilt, leaved design valves. Exterior and interior views of the opening. Pan-tilt,-and-over, hidden and parallel-sliding design, folding wings. Vzlomozaschitnye and bulletproof construction. Construction flaps for restoration …

Technical characteristics WICLINE 77

Profile material - aluminium, Outer width of the frame - 179 mm, number of chambers in the frame / sash - 1/1

Mullion transom curtain wall system with 50 mm profiles front view. Suitable for all types of buildings (low, mid and high-rise). With its wide variety of profiles this versatile curtain wall system can be adapted to meet the requirements of any project. - Cover cap, silicone gap and combined …

Technical characteristics E85

Profile material - aluminium, Outer width of the frame - 67 mm, number of chambers in the frame / sash - 3/3

The S67 system is for windows, stained-glass windows and doors. The S67 system has the basic size of 67 mm for a frame and 75 mm for a shutter. The basis of system is made by the combined profiles consisting of two aluminum shapes connected among themselves by means of two thermoinserts from the …

Technical characteristics S67

Profile material - aluminium, Outer width of the frame - 62 mm, number of chambers in the frame / sash - 3/3

The system of aluminum profiles ALTW62 intended for the manufacture of various types of structures, which are increased requirements of thermal insulation and soundproofing. Universal window and door system with thermal ALTW62 has a base depth of 62 mm for frames and 70 mm for the sash. Support …

Technical characteristics ALT W62

Profile material - aluminium, Outer width of the frame - 63 mm, number of chambers in the frame / sash - 3/3

Thermal systems for the "swing-vіdkidnih" vіkonnih that door konstruktsіy, sertifіkovana IFT Rosenheim. Osnovnі characteristics: • Basic Glibin Sistemi 62.5 mm • For Prop teploperedachі vіdnositsya to Group 2.1 • Mіstit spetsіalno rozroblenі profіlі door whether yakogo rozmіru scho іdealno …

Technical characteristics M 11000 Alutherm Plus

Profile material - aluminium, Outer width of the frame - 73 mm, number of chambers in the frame / sash - 3/3

Aluminium profile system intended to accomplish thermal insulated sliding windows or sliding segments for external elements of constructions, for example loggias and balconies. The systems allows to use fillings, of 23-30 mm thickness. The structural depth of the profiles equals 46 mm for frames, …

Technical characteristics Ponzio SL600tt EVO

Profile material - aluminium, Outer width of the frame - 65 mm, number of chambers in the frame / sash - 3/3

Window series with a basic depth profile of 65 mm. Turn-and-tilt, swivel, tilt, leaved design valves. Exterior and interior views of the opening. Pan-tilt,-and-over, hidden and parallel-sliding design, folding wings. Balcony doors. Vzlomozaschitnye and bulletproof construction. Construction flaps …

Technical characteristics WICLINE 65

Profile material - aluminium, Outer width of the frame - 0 mm, number of chambers in the frame / sash - 1/1

Mullion and transom façade is based on a series WICTEC 50. On the supporting structure made of steel or wood. The same rack and transom profiles. Drainage through the horizontal-vertical circumferential profile of EPDM. Heat protection: Uf-koeffitsienty according to DIN EN ISO 10077

Technical characteristics WICTEC 50 A

Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3

Типовой пример классической алюминиевой профильной системы с терморазрывом (термомостом) шириной 24 мм. Если в установленных алюминиевых окнах не известен производитель и серия оконного профиля, для расчета теплопотерь достаточно выбрать эту серию для рам и створок толщиной 60 мм. Определить этот …

Technical characteristics Алюминиевый профиль 60 мм, термомост 24 мм

Profile material - aluminium, Outer width of the frame - 62 mm, number of chambers in the frame / sash - 3/3

ALT W62 HS is window and door systems with hidden sash. Due to the minimum visible width of the profiles, as well as the same visible width of the fixed light and the active sash, the glazing area of the window with the hidden sash is much larger than the glazing area of classic window with the …

Technical characteristics ALT W62 HS

Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3

The S60 is a aluminium system with thermobridge (thermo inserts from the polyamide reinforced by fiber glass) 27 mm. The C60 system has the basic size of 60 mm. It use to manufacture windows, stained-glass windows and doors. In a basis of C60 system so-called "eurogroove" is put is allows to use …

Technical characteristics S60

Profile material - aluminium, Outer width of the frame - 160 mm, number of chambers in the frame / sash - 4/5

Themally insulated lift and slide system intended to accomlish elements of external constructions. The structure allows to make stable constructions of large size, with even 6 sashes and of very large sash weight. The structural depth of profiles equals 67mm for sashes, 160 mm for double track …

Technical characteristics Ponzio SL 1600

Profile material - aluminium, Outer width of the frame - 69 mm, number of chambers in the frame / sash - 3/3

Warm FT69 aluminum system intended for the manufacture of doors with good heat and noise insulation at high operational stability and lightness. Eurogroove. Coefficient of thermal resistance: 0.62 m2K/W. The thickness of the glass: 22-46 mm.

Technical characteristics Framex FT69 Door

Profile material - aluminium, Outer width of the frame - 69 mm, number of chambers in the frame / sash - 3/3

Warm FT69 aluminum system intended for the manufacture of windows and doors with good heat and noise insulation at high operational stability and lightness. Three loop seal. Eurogroove. Coefficient of thermal resistance: 0.62 m2K/W. The thickness of the glass: 22-46 mm.

Technical characteristics FT69