Threechamber profile systems
Catalogue of window profile systems, facade glazing
|
Talisman - S60 Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3 The S60 is a aluminium system with thermobridge (thermo inserts from the polyamide reinforced by fiber glass) 27 mm. The C60 system has the basic size of 60 mm. It use to manufacture windows, stained-glass windows and doors. In a basis of C60 system so-called "eurogroove" is put is allows to use … |
 | |
|
Framex, TM - Framex FT69 Door Profile material - aluminium, Outer width of the frame - 69 mm, number of chambers in the frame / sash - 3/3 Warm FT69 aluminum system intended for the manufacture of doors with good heat and noise insulation at high operational stability and lightness. Eurogroove. Coefficient of thermal resistance: 0.62 m2K/W. The thickness of the glass: 22-46 mm. Technical characteristics Framex FT69 Door |
| |
|
Framex, TM - FT69 Profile material - aluminium, Outer width of the frame - 69 mm, number of chambers in the frame / sash - 3/3 Warm FT69 aluminum system intended for the manufacture of windows and doors with good heat and noise insulation at high operational stability and lightness. Three loop seal. Eurogroove. Coefficient of thermal resistance: 0.62 m2K/W. The thickness of the glass: 22-46 mm. Technical characteristics FT69 |
| |
|
ALTEST - Eskimos 530 Profile material - aluminium, Outer width of the frame - 53 mm, number of chambers in the frame / sash - 3/3 Warm aluminum profile Eskimos 530 with a mounting width of 53 mm and 69 have high levels of resistance to heat transfer. Suitable for the production of windows, balconies, doors and entrances, as well as stained glass. Aluminum profiles are interconnected thermal insulator 24 mm. Polyamide … Technical characteristics Eskimos 530 |
| |
|
PROCURAL (Ponzio Polska) - Ponzio PE 52 Profile material - aluminium, Outer width of the frame - 52 mm, number of chambers in the frame / sash - 3/3 The three-chamber system, design with a profile groove in Euro standard and the groove used in windows and balcony doors made of PVC. The structural depth of the frame is 52 mm and 60 mm for the wings. The system allows using a wide range of hardware and ease to work. Three-chamber profile … Technical characteristics Ponzio PE 52 |
| |
|
YAWAL - TM62 Profile material - aluminium, Outer width of the frame - 62 mm, number of chambers in the frame / sash - 3/3 Thermo Modular System 62 (TM62 2.1) is a three-chamber system of aluminum profiles that are used to manufacture windows, doors, windows, partitions. The system TM 62 2.1 can use different types of fillings, including glazing thickness 13-57 mm. The maximum width of the turning and … Technical characteristics TM62 |
| |
|
F. W. Brokelmann Aluminium - IBF Profile material - aluminium, Outer width of the frame - 70 mm, number of chambers in the frame / sash - 3/3 A series of aluminum profiles IBF is designed for industrial production of insulated windows in the renovation or construction of industrial buildings. It was designed to preserve the architectural heritage and can be used in the reconstruction of architectural monuments, as the profile of the … |
| |
|
F. W. Brokelmann Aluminium - RG60 Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3 Aluminum window and door system with a mounting width of 60 mm. Leaf width of 70 mm. Ideal for commercial and industrial buildings. Good thermal insulation is achieved through the insert of polyamide, reinforced with fiberglass. The cavity is filled with polyurethane foam with high insulation … Technical characteristics RG60 |
| |
|
Aluminum profile - Алюминиевый профиль 60 мм, термомост 16 мм Profile material - aluminium, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3 Типовой пример классической алюминиевой профильной системы с терморазрывом (термомостом) шириной 16 мм. Если в установленных алюминиевых окнах не известен производитель и серия оконного профиля, для расчета теплопотерь достаточно выбрать эту серию для рам и створок толщиной 60 мм. Определить этот … Technical characteristics Алюминиевый профиль 60 мм, термомост 16 мм |
| |
|
Reynaers Aluminium - CP 155 Profile material - aluminium, Outer width of the frame - 155 mm, number of chambers in the frame / sash - 3/3 Concept Patio® 155 – это система термоизолированных раздвижных и подъемно-раздвижных дверей. Она предназначена для создания максимально больших застекленных поверхностей с учетом повышенного комфорта. Система прекрасно совместима с конструкциями из системы CS 86. Система CP 155 существует в … Technical characteristics CP 155 |
| |
|
RESCARA | ASAS Aluminyum A.S - Rescara RST116 Profile material - aluminium, Outer width of the frame - 116 mm, number of chambers in the frame / sash - 3/2 Application options: lift and slide, sliding, vent combination of 45 deg, vent with combination bead, mono railed frame, three reiled frame, fixed frame.. Technical properties: Frame depth: 116,4 — 180,8 mm Vent depths: 52,1 mm Profile thickness: 1,6 / 1,8 / 2 mm Glass thickness, max: 33 mm … Technical characteristics Rescara RST116 |
| |
|
PROFILCO - PR45 Profile material - aluminium, Outer width of the frame - 105 mm, number of chambers in the frame / sash - 3/2 PR45 is a high specification thermal-breaking system which provides supreme protection from cold, heat and noise, ensuring ideal conditions at the internal spaces which protects. It is the best solution for those having great demands from the aluminum systems designated for their constructions, … Technical characteristics PR45 |
| |
|
PROCURAL (Ponzio Polska) - Ponzio SL1200 Profile material - aluminium, Outer width of the frame - 120 mm, number of chambers in the frame / sash - 3/3 Sliding 1200tt - lift and slide system. The system with thermal insulation, designed to produce elements of the external enclosure lift and slide for example housing balconies and loggias.Design depth is 50 mm for wings and 120 mm for double track frames and 184 mm for triple track frames. … Technical characteristics Ponzio SL1200 |
| |
|
REHAU - Thermo - Design- 70 Production of profile system finished in 2007g Profile material - vinyl, Outer width of the frame - 70 mm, number of chambers in the frame / sash - 3/3 Profile Design and specifications * External seals System depth 70 mm Overlaps seals: 7-8 mm The clearance of the porch: 3 mm Offset of the groove locking devices 13 mm The maximum thickness of the filling: 41 mm Technical characteristics Thermo - Design- 70 |
| |
|
REHAU - Basic-Design Production of profile system finished in 2008g Profile material - vinyl, Outer width of the frame - 60 mm, number of chambers in the frame / sash - 3/3 Window profiles system REHAU S730-Basic-Design are manufactured from RAU-PVC, non-plasticized, designed specifically for outdoor use PVC impact-resistant according to DIN 7748. On 01/01/89 REHAU window profiles are made with cadmium. External seals Thickness: 60 mm Number of chambers: 3 … Technical characteristics Basic-Design |
| |
