PROFILCO PR45
Sliding profile system PR45
Brand PROFILCO
| Outer width of the frame | 105 mm | |
| Uf profile | 4.1 W/Km² | |
| Glass unit thickness | 32 mm |
| Outer width of the frame | 105 mm |
| U Factor of profile system (armoured if applied) | 4.1 W/Km² |
| Thickness of outer wall | 1.6 mm |
| Number of chambers in the frame | 3 |
| Number of chambers in the sash | 2 |
| Max width of a glass unit | 32 mm |
| No. of sealing circuits | 3 |
| Material | aluminium profiles |
| Horizontal sliding constructions' fittings | yes |
| Sash window light blocking | 133 mm |
| Sound insulation | 39 dB |
PR45 is a high specification thermal-breaking system which provides supreme protection from cold, heat and noise, ensuring ideal conditions at the internal spaces which protects. It is the best solution for those having great demands from the aluminum systems designated for their constructions, offering excellent technical and aesthetic solutions.
Main Characteristics of PR45:
Classical design with soft curves absolutely matching with PROFILCO systems design.
Thermal isolation is achieved with the use of polyamide (16mm wide) which interrupt thermal flow and noise between the outer and inner side of the window.
Energy saving by reducing heating and cooling expenses.
Avoidance of the condensation effect at the inner side of the window.
Sash width is 45mm and height 98mm
Ability to embrace up to 32mm glazing
Inside-wall driver height is 35mm which is the same as the height of the floor in order to avoid a step between the floor and the driver. The referential height is achieved by the innovative design of the inside-wall driver profiles where the thermal isolation is placed on the “tower” of the driver and not to the side of it so that it is aligned with the thermal isolation of the sash. By this way, the use of an additional thermal breaking profile is avoided in these drivers, reducing at the same time their weight but not compromising the durability.
The width of the triple inside-wall driver is 139mm which is appropriate for installation inside modern building walls.
The referential height of successive sliding driver is 47mm.
Ability to connect the profiles by using press corner joint.
Connection of profiles is avoided to be done at the thermal breaking points, meaning stronger connection and increased thermal-break properties of the windows at the same time.
Sliding movement on additional driver (anodized or inox) for reduced friction and color destruction.
Easy sliding provided by big diameter rollers (29mm) which can be replaced without disassembling the sash and can be easily adjusted.
Special designed dampers. Attached brush on the lower damper for wiping the additional driver. The upper damper is inserted in the driver for better alignment and to avoid the swing of the sashes.
Multiple locks for higher safety
Ergonomic design of the fly-screen sash handle.
Main Characteristics of PR45:
Classical design with soft curves absolutely matching with PROFILCO systems design.
Thermal isolation is achieved with the use of polyamide (16mm wide) which interrupt thermal flow and noise between the outer and inner side of the window.
Energy saving by reducing heating and cooling expenses.
Avoidance of the condensation effect at the inner side of the window.
Sash width is 45mm and height 98mm
Ability to embrace up to 32mm glazing
Inside-wall driver height is 35mm which is the same as the height of the floor in order to avoid a step between the floor and the driver. The referential height is achieved by the innovative design of the inside-wall driver profiles where the thermal isolation is placed on the “tower” of the driver and not to the side of it so that it is aligned with the thermal isolation of the sash. By this way, the use of an additional thermal breaking profile is avoided in these drivers, reducing at the same time their weight but not compromising the durability.
The width of the triple inside-wall driver is 139mm which is appropriate for installation inside modern building walls.
The referential height of successive sliding driver is 47mm.
Ability to connect the profiles by using press corner joint.
Connection of profiles is avoided to be done at the thermal breaking points, meaning stronger connection and increased thermal-break properties of the windows at the same time.
Sliding movement on additional driver (anodized or inox) for reduced friction and color destruction.
Easy sliding provided by big diameter rollers (29mm) which can be replaced without disassembling the sash and can be easily adjusted.
Special designed dampers. Attached brush on the lower damper for wiping the additional driver. The upper damper is inserted in the driver for better alignment and to avoid the swing of the sashes.
Multiple locks for higher safety
Ergonomic design of the fly-screen sash handle.
